The Enduro L6 power supply series sets a new standard in the segment of affordable models for mid-range gaming configurations. ENDORFY introduces it in three variants: Enduro L6 650 W, Enduro L6 750 W and Enduro L6 850 W, designed for users looking for hardware ready for several graphics card, processor and memory upgrades.
Each of the newly debuting power supplies offers full compliance with the ATX 3.1 standard and a native 12V-2x6 connector, ensuring support for modern PCIe 5.1 graphics cards without the need for additional adapters. The package is completed by Cybenetics ETA Platinum and 80 PLUS® Gold certificates, as well as a seven-year manufacturer’s warranty.
Compliance with the new generation of GPUs
Modern graphics cards operate with rapid spikes in power consumption, which is why the Enduro L6 series has been fully adapted to the ATX 3.1 standard. All models are equipped with a native 12V-2x6 connector routed directly from the power supply housing, simplifying installation, eliminating the need for adapters and ensuring stable power delivery even for demanding configurations with new-generation graphics cards.
The Enduro L6 850 W and 750 W models feature a 12V-2x6 connector with a 600 W load capacity and three PCI-E 8-pin (6+2) connectors, allowing them to support GPUs with the highest power consumption of the current generation. The 650 W variant is equipped with a 12V-2x6 connector with a 450 W load capacity and two PCI-E 8-pin (6+2) connectors, intended for configurations built around graphics cards with lower power consumption. Regardless of wattage, each model uses flat, black flat ribbon cabling, which takes up less space and makes cable management inside the case easier.
Efficiency higher than the design assumed
The Enduro L6 design was developed with Gold-class standards in mind, but during rigorous testing the platform achieved such high energy efficiency that, in addition to the 80 PLUS® Gold certificate, it also received Cybenetics ETA Platinum – a class higher than originally assumed at the start of the project.
In practice, this means less energy converted into heat, lower power consumption and cooler operation of the entire system. Stable voltage regulation is handled by a DC-DC topology usually found in more expensive designs, while cooling is provided by a Stratus 120 mm fan with an FDB bearing and an operating profile developed specifically for the Enduro L6 series. A set of seven independent protections watches over safe operation.
A foundation for years
A power supply is one of those components that stays in a computer through several successive generations of hardware. That is why the Enduro L6 series has been designed as a long-term foundation for a modern computer, ready for high loads, modern power standards and many years of use. Today, the choice comes down to matching the wattage to the configuration, without compromising on power standards, efficiency or operational safety.
